AV Tech Tools / Planner

Signal Flow Diagram

Draw how the show is wired: drop in real consoles, stage boxes, switchers and wireless receivers, drag cables jack to jack, and get plain-language warnings, an input list, a cable schedule and a PDF with your title block.

A free signal flow diagram tool for AV crews that wires real consoles, stage boxes, video switchers and wireless receivers jack to jack, flags incompatible connections in plain language, and exports an input list, a cable schedule CSV and a PDF with a title block.

By using this tool you agree to the Terms of Use and Privacy Policy.

0 devices0 cables

How to use this tool

1. Insert gear. Press Insert device (or the I key) and search by brand, model or type, for example “M32”, “ATEM” or “wireless”. Pick a device and press Add. File › New diagram gives you an empty page; File › Open sample shows a finished example.

2. Connect jacks. Drag from one jack to another, or tap one jack and then the other. Inputs sit on the left of each device and outputs on the right. A row like “Mic/Line In (14 free)” connects to the next free channel. Cables route themselves around the gear.

3. Fix the warnings. Cables with a problem get an amber or red marker and appear under Warnings in the status bar. Select a cable and open Properties to add its label, length and a note.

4. Tidy up. Drag devices, select several with a box (or Shift-click), then use Arrange to align them, Ctrl/⌘+G to group them, or Insert › Zone to frame them as Stage, FOH or Video World. Drag a cable segment to route it by hand. Right-click (or long-press) anything for its options. Undo covers every change.

5. Export. Fill in the title block under File › Project & title block, then use Export for a vector PDF of every page (with the cable schedule and input list if you like), a PNG of the current page, or the CSV files. Save the layout file to reopen it later.

Keyboard shortcuts

KeysWhat it does
IInsert a device
Drag a jackConnect two jacks
Arrow keysPan the drawing; with something selected, nudge it (Shift for bigger steps)
FFull screen (Esc leaves)
PShow or hide the Properties panel
Ctrl/⌘+Z, Ctrl/⌘+Shift+ZUndo, redo
Ctrl/⌘+C, X, VCopy, cut, paste (works between diagrams)
Ctrl/⌘+DDuplicate
Ctrl/⌘+G, Ctrl/⌘+Shift+GGroup, ungroup
Ctrl/⌘+ASelect everything on the page
DelDelete the selection
+ / − / 0Zoom in, zoom out, fit to screen
[ / ]Step through devices
Space + drag, or middle-dragPan

Signal types and warnings

SignalWhat it is
MicAnalog mic level on XLR, e.g. microphones, DI boxes, wireless receivers set to mic
LineAnalog line level on XLR, TRS or RCA, e.g. mixer outputs, playback
AES3 / ADAT / MADIDigital audio on XLR, optical or BNC; needs a matching digital input
HDMI / SDI / DP / DVIVideo; HDMI and SDI need a converter between them
NetworkEthernet, Dante, AVB, HDBaseT and LED data on RJ45/etherCON
AES50 / digital snakeConsole-to-stage-box links (AES50, SLink, DX, dSnake, Ultranet) that only talk to their own kind
USB, fiber, speaker, power, DMX, control, sync, RFEverything else on a show: computers, fiber runs, amplifier outputs, power, lighting data, RS-232/GPIO/MIDI, word clock and antennas

Each signal type has its own color and line pattern, so a black-and-white print still tells HDMI from SDI. The key on the drawing only lists the types you have used. Warnings are written for the person patching the show: what is wrong and what usually fixes it.

Gear library sources

Library port lists were read from each manufacturer’s published product page, spec sheet or manual. Devices are listed for planning only; listing a product is not a recommendation.

Show every device and its source

The list appears when the tool loads.

Layout file

Save layout file downloads a JSON file (format kynetic-signal-flow, version 2) with every page, device definition, cable (including routes you drew by hand), note, zone, group and the title block, so it opens the same way later even if the library changes. Files saved by the first version still open.

FAQ

Where do the device port lists come from?

Each library device was checked against the manufacturer’s own product page, spec sheet or manual. The source link and the date it was checked are listed under Gear library sources on this page. If a port list could not be confirmed from an official source, the device was left out. Option cards (Dante cards, expansion slots) are not drawn; add them with a custom device or edit a copy.

Does it check that my connections will work?

It warns in plain language when a cable joins two outputs or two inputs, mixes signal types (for example HDMI into an XLR input, or HDMI into SDI without a converter), puts a mic-level signal into a line input, joins different digital snake protocols, or puts two cables on one jack. It cannot know about adapters you carry, firmware or patching inside a console, so treat warnings as a checklist, not a guarantee.

How are cables routed?

Cables route themselves with right-angle bends and keep clear of every device box, and they re-route as you move gear. Where two cables cross, the later one hops over the earlier one so you can tell a crossing from a join, on screen and in the PDF and PNG. To route a cable yourself, select it and drag a segment or a corner; your route is saved in the layout file. Right-click the cable (or long-press on a phone) and choose Reset route to go back to automatic.

Can I split a big show across pages and zones?

Yes. Use the page tabs above the drawing (or Insert › Page) for audio, video and network pages. The cable schedule and input list cover every page, and the PDF prints every page that has gear. Zones such as Stage, FOH or Video World are labeled background frames: drag a zone by its header and everything inside moves with it.

Can I add gear that is not in the library?

Yes. Insert › Custom device builds one from scratch (name, ports, signal type, direction, count and connector), or right-click a device and choose Copy and edit. Custom devices are saved to My gear in this browser, and you can export them to a file and import them on another computer.

What is in the input list and cable schedule?

The cable schedule lists every cable with its label, signal, both ends, connectors, length and any warning. The input list shows every connected input on mixers, stage boxes, switchers, processors and displays in jack order, with its source. Both download as CSV for spreadsheets, and both can be added as pages to the PDF.

Is the PDF drawn to scale?

No. Signal flow is a schematic, so the PDF says NOT TO SCALE. It is vector, so it stays sharp when printed or zoomed, and it uses the same title block as the Event Diagram tool with fields you can rename.

Where is my diagram saved?

Only in this browser (localStorage) and in any layout file you download. Nothing is uploaded. Clearing site data removes the autosave, so download a layout file for anything you need to keep. Layout files from the first version of this tool still open.

Planning aid only. This tool draws signal flow for planning and documentation. Device port lists are copied from manufacturers’ published specifications and can be wrong, out of date, or different for your model year, option cards or firmware. Compatibility warnings are general and cannot see adapters, settings or internal patching. Check every connection, level and power requirement on the actual equipment before the show. Use at your own risk under our Terms of Use.

Plan the show with Kynetic

Audio, video, lighting and show support for corporate and medical events.